DDE

From Arch Hurd Wiki
Revision as of 11:24, 30 July 2018 by Z3ntu (talk | contribs) (Import from https://web.archive.org/web/20110902094011/http://wiki.archhurd.org/index.php?title=DDE&action=edit)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

DDE is a universal interface for drivers that makes it easy for systems without many native drivers (such as the hurd) to use drivers from systems with many native drivers (like Linux 2.6). These drivers can run in userspace, which has some interesting implications.

Overview

Porting DDE to the Hurd was originally the work of Zheng Da. His work is currently in the incubator git repository of the hurd. See GNU's DDE page for a more in-depth dicussion.

From a User Perspective

For the user, this means that, once we have completed the implementation of DDE, Hurd will support a wider variety of hardware, using Linux 2.6's drivers. You need to do only three things to get DDE running:

  • Download a modified Gnumach
  • Download the DDE drivers
  • Start the translators!

Gnumach

The normal gnumach that is distributed with Arch Hurd cannot use DDE's user level drivers. A build of gnumach from the master-userleveldrivers git branch is in [extra], however, so run

pacman -S gnumach-userleveldrivers

!Warning! This kernel overwrites the normal gnumach, and has forfeited some kernel-side drivers for DDE ones, such as the pcnet32 driver required to access the internet from Qemu. Thus, either back up your gnumach package (see /var/cache/pacman/pkg/) or make sure you install your ethernet drivers at the same time, otherwise, if something goes very wrong, your system may not be able to connect to the internet.

Drivers

Drivers that use DDE are available in [testing], and may come to [extra] soon. To get them, run

pacman -S dde

. The ne2k driver has been tested to have internet connection!

Using

These commands have been tested to use the driver dde_ne2k with gnumach-userleveldrivers under QEMU

Gnumach

While you are still using gnumach from [core], install the packages you will need

pacman -S gnumach-userleveldrivers dde
QEMU

Out of the box, QEMU uses an emulated pcnet32 driver. The dde_pcnet32 driver has not been tested to fully work, so it is advisable to use the ne2k driver instead. Add this to the end of your QEMU launch command (and remove other -net commands)

 -net nic,vlan=1,model=ne2k_pci -net user,vlan=1
Arch Hurd

Boot your qemu image, then login as root. It is probably not necessary to run as root, since these are *user* level drivers, but this has not been tested fully. Run the following commands

settrans -fgap ne2k /hurd/dde/dde_ne2k_pci
settrans -fgap /dev/eth0 /hurd/dde/devnode eth0 -M ne2k
settrans -fgap /servers/socket/2 /hurd/dde/pfinet -i /dev/eth0 -a 10.0.2.15 -g 10.0.2.2 -m 255.255.255.0

As you run these commands, you should see status messages informing you that a device is being detected. If all goes well, you should be able to run 'ifconfig' and be informed that eth0 is UP BROADCAST RUNNING MULTICAST

Congratulations! You are now running a network driver compiled from linux source in your Hurd's userspace!